WHAT IS ETHERNET OLD ETHERNET NOT DETERMINISTIC FAST ETHERNET

WHAT IS ETHERNET OLD ETHERNET NOT DETERMINISTIC FAST ETHERNET www.phwiki.com

WHAT IS ETHERNET OLD ETHERNET NOT DETERMINISTIC FAST ETHERNET

Butler, Karen, Group Editor has reference to this Academic Journal, PHwiki organized this Journal Gary Marret, RCDD WHAT IS ETHERNET WHAT IS ETHERNET/IP ETHERNET HARDWARE HOW DO I CABLE FOR INDUSTRIAL ETHERNET WHAT IS ETHERNET ETHERNET history developed in 1973 as shared medium b in addition to width 10 Mbps bus topology CSMA/CD procedure as long as media access

Berklee College of Music US www.phwiki.com

This Particular University is Related to this Particular Journal

OLD ETHERNET NOT DETERMINISTIC NOT CHOSEN FOR FACTORY NETWORKS, LACKED DETERMINISM DETERMINISM = ABILITY TO PREDICT ETHERNET WAS BASED ON SHARED BACK BONE AND HALF DUPLEX FAST ETHERNET DEVELOPED FAST ETHERNET ETHERNET today scalable b in addition to width with 10/100/1000 Mbps switched “Full Duplex” connection without collisions IEEE st in addition to ards as long as prioritization in addition to flow control st in addition to ards as long as Copper, Fiber, Plastic, in addition to Wireless transmission WHAT IS ETHERNET/IP IP = INDUSTRIAL PROTOCOL OPEN STANDARD FOR INDUSTRIAL NETWORKS USES STANDARD ETHERNET AS A BASE ADDS AN APPLICATION PROTOCOL FOR FACTORY AUTOMATION

ETHERNET HARDWARE TRANSCEIVER MEDIA CONVERTER HUB SWITCH ROUTER GATEWAY TRANSCEIVERS CONNECT NETWORK MEDIA TO AUI PORT ON EQUIPMENT (15 PIN DSUB) 10BASE-FL 10BASE-T 10BASE-2 MEDIA CONVERTERS 10/100 MEDIA CONVERTERS GIGABIT MEDIA CONVERTERS FIBER OPTIC MEDIA CONVERTERS SERIAL DATA MEDIA CONVERTERS

HUBS SHARE ONE COMMUNICATIOS CHANNEL FOR ALL DEVICES CONNECTED TO IT. REGENERATES INCOMING DATA AND DISTRIBUTES IT TO ALL PORTS CSMA/CD LAYER 1 OF THE OSI MODEL SWITCHES ALWAYS USE FOR INDUSTRIAL APPLICATIONS REGENERATES INCOMING DATA AND DISTRIBUTES IT ONLY TO THE DEVICE IT’S INTENDED FOR PROVIDES POINT-TO-POINT CONNECTION BETWEEN DEVICES ROUTERS INTERCONNECTS NETWORKS WITH DIFFERENT LAYER 3 PROTOCOLS COMBINATION OF HARDWARE AND SOFTWARE CONTROLS TRAFFIC BETWEEN NETWORKS

GATEWAYS A ROUTER CONVERTS PROTOCOLS AND ENABLES DATA EXCHANGE BETWEEN NETWORKS Evolving Factory Network Motors, Drives, Actuators Robotics Sensors in addition to other Input/Output Devices Programmable Logic Controllers (PLC) Human Machine Interface (HMI) PC Based Controllers Back-Office Mainframes in addition to Servers (ERP, MES, CAPP, PDM, etc.) Device Level Network Ethernet Office Applications, Internetworking, Data Servers, Storage Corporate IT Network Central NMS Pager VLANs VIRTUAL LOCAL AREA NETWORK GROUPING OF DEVICES ON A SWITCH OR MULTIPLE SWITCHES ON A PHYSICAL LAN PORT BASED VLANs PORT AND MAC ADDRESSED VLANs NETWORK ADREESED VLANs PROTOCOL BASED VLANs

QoS MANAGES NETWORK TRAFFIC QoS CAN BE A COMBINED EFFORT OF ROUTERS, SWITCHES, STATIONS, AND SERVERS Quality of Service (QoS) Data Collection Mission-Critical (Control) Back Office Configuration (File Transfer) HOW DO I CABLE FOR INDUSTRIAL ETHERNET ANSI/TIA/EIA-568-B.2 COMMERCIAL BUILDING STANDARDS FOR BALANCED TWISTED PAIR ANSI/TIA/EIA-568-B.3 STANDARDS FOR OPTICAL FIBER CABLING COMPONENTS ANSI/TIA/EIA-569-A COMMERCIAL BUILDING STANDARDS FOR PATHWAY AND SPACES

CABLING TOPOLOGY STAR TOPOLOGY HIERARCHICAL STAR TOPOLGY WS WS TR WS WS WS MC WS WS WS WS IC TR TR WS WS WS RECOGNIZED HORIZONTAL CABLE TYPES FOUR-PAIR 100 OHM BALANCED TWISTED PAIR – UTP or ScTP TWO OR MORE STRANDS OF 50/125um OR 62.5/125um MULTIMODE OPTICAL FIBER CABLE HORIZONTAL CABLING DISTANCES 90 METER (295’) MAXIMUM FROM THE PATCH PANEL TO THE OUTLET/CONNECTOR 5 METER (16’) MAXIMUM FROM OUTLET TO DEVICE 10 METER (33’) MAXIMUM FOR THE TOTAL COMBINED LENGTH OF PATCH CORDS

UTP or ScTP USE MINIMUM CAT5e UTP OR ScTP GROUND LOOP CONCERNS WITH ScTP MAXIMUM 1V rms BETWEEN SHIELD AND EQUIPMENT GROUND WIRE AT OUTLET GROUND AT PATCH PANEL ONLY OPTICAL FIBER IS BEST FOR NOISE IMMUNITY INSTALLATION PRACTICES Remove as little as possible of the jacket up to the connector Maintain twist up to the termination – under .5” INSTALLATION PRACTICES AVOID EMI RFI SUPPORT CABLE USE CABLE TRAY USE INNERDUCT ADHERE TO CABLE MANUFACTURER SPECIFICATIONS LABEL, LABEL, LABEL

Butler, Karen Corporate Logo Group Editor www.phwiki.com

RECOGNIZED BACKBONE CABLE TYPES 100 OHM BALANCED TWISTED PAIR 50/125um OR 62.5/125um OPTICAL FIBER CABLE SINGLEMODE OPTICAL FIBER CABLE BACKBONE CABLING DISTANCE DETERMINED BY DATA RATE, BANDWIDTH, AND MEDIA TYPE UTP/ScTP CAT5e CANNOT EXCEED 90 METERS FOR ETHERNET BACKBONES RESOURCES www.cisco.com www.commscope.com www.hellermann.tyton.com www.hirschmann.com www.levitonvoicedata.com www.p in addition to uit.com www.signamax.com www.unicomlink.com http://ethernet.industrial-networking.com

QUESTIONS

Butler, Karen Group Editor

Butler, Karen is from United States and they belong to Corporate Logo and they are from  Phoenix, United States got related to this Particular Journal. and Butler, Karen deal with the subjects like Advertising; Promotions

Journal Ratings by Berklee College of Music

This Particular Journal got reviewed and rated by Berklee College of Music and short form of this particular Institution is US and gave this Journal an Excellent Rating.